Cepek H1 CTI Kits

All Cepek CTI kits use a quick disconnect which isolates each wheel keeping the air from escaping when removing a wheel from the truck. Since our disconnects completely come apart you can remove a wheel from the truck without having to remove the hub fitting. This will save you lots of time when you rotate or service your tires. Shown is our Exposed CTI Kit and splined lugnuts on a 17" Polished Aluminum Wheel.
	Exposed CTI Kit for Factory Steel 16.5" Wheels. Convert your old leaking plastic CTI lines to a high grade all Stainless Steel braided system. This line set is a direct replacement for the 16.5" factory lines on the Hummer one piece and two piece steel wheels. Each set has all the parts you need to put CTI on 4 complete wheels. The kit has 4 Stainless Steel Braided lines, a polished guard plate hub protector kit and a 1/4 npt thread that goes into the factory style wheel fitting number 174401. 16.5" Factory 2 piece steel wheel - Part # FAC174456R2-2KIT 16.5" Factory 1 piece steel wheel - Part # FAC174456R2-1KIT 525.00
	Hidden CTI Quick Release Kit for Cepek Wheels Here's how it Works Each kit contains all the parts you need to install Hidden CTI on 4 Cepek aluminum wheels. (includes 174451 air stem). 16.5" Cepek wheel - Part # CPK174471-16KIT 17" Cepek wheel - Part # CPK174471-17KIT 18" Cepek wheel - Part # CPK174471-18KIT 700.00 If you use the hidden kit each wheel has to be tapped and a slot has to be cut to run the air line. Our shop can do it on new wheels for 40.00 ea with the purchase of this cti kit (55.00 ea w/o kit purchase) or you can do it yourself. Install Instructions
	Exposed CTI Kit for Cepek Wheels This line set is designed for Cepek Aluminum Hummer one piece wheels. Each set has all the parts you need to put CTI on 4 complete wheels. The kit has 4 Stainless Steel Braided lines and a polished guard plate hub protector kit. There are 2 possible line fittings used. One a bent tube #4 JIC end and the other is a 1/4npt factory style end. Before ordering check with us. 16.5" Cepek wheel - Part # CPK174456R2-16KIT - 525.00 17" Cepek wheel - Part # CPK174456R2-17KIT - 525.00 18' Cepek wheel - Part # CPK174456R2-18KIT - 575.00
	Stainless (hidden) CTI for Factory 2 Piece 17 " Aluminum Wheels. (hidden CTI) This line set is a direct replacement for the 17" factory lines on the Hummer two piece aluminum wheels. Each set has all the parts you need to put CTI on 4 complete wheels. The kit has 4 Stainless Steel Braided lines a special crimp fitting, a double swivel fitting on the end of one line, an extra brass elbow and an additional end line fitting that screws into the wheel itself. You may have to modify your wheel cover to fit. Part Number HUM174456R219 - 500.00 ea.
	CTI Kit for Factory 1 Piece 16.5" and 17 " Aluminum Wheels. (hidden CTI) Convert your old leaking plastic CTI lines to a high grade all Stainless Steel braided system. This line set is a direct replacement for the 17" factory lines on the Hummer one piece and two piece factory aluminum wheels. Each set has all the parts you need to put CTI on 4 complete wheels. The kit has 4 Stainless Steel Braided lines and all the required fittings. Includes: Special Fitting for the 1/4" NPT hole in the factory wheel. You may have to modify your wheel cover to fit. Part Number 174456R219 - 500.00
	Splined Lug Nuts Chrome 3.50 ea. Wrench / Socket 5.00 ea. Note: Lug nuts from factory aluminum wheels do not fit Cepek wheels. Order extra nuts if you use a spare tire carrier.
	Black Splined Lug Nuts 5.00 ea. Wrench / Socket 5.00 ea. Note: Lug nuts from factory aluminum wheels do not fit Cepek wheels. Order extra nuts if you use a spare tire carrier.
CTI Parts Line Detail

Cepek - G.T. Inc. H1 CTIS Kits & Lug Nuts